EIGRP Konfig Dasar – packetnotes

Perangkat yang diperlukan:

Laptop/PC dengan GNS3 yang sudah terinstal.

[spacer height=”20px”]Tugas:

Konfigurasikan sesuai topologi di atas, pastikan update EIGRP nya spesifik hanya pada interface R1

Konfigurasi:

int s0/0
    no sh
    ip addr 12.12.12.1 255.255.255.0
    !
int lo0
    no sh
    ip addr 1.1.1.1 255.255.255.255
    !
router eigrp 10
    net 12.12.12.1 0.0.0.0
    net 1.1.1.1 0.0.0.0
    no au

int s0/0
    no sh
    ip addr 12.12.12.2 255.255.255.0
!
int fa0/0
    no sh
    ip addr 23.23.23.2 255.255.255.0
!
int lo0
    ip addr 2.2.2.2 255.255.255.255
!
router eigrp 10
    net 12.12.12.2 0.0.0.0
    net 23.23.23.2 0.0.0.0
    net 2.2.2.2 0.0.0.0
    no au

int fa0/0
    no sh
    ip addr 23.23.23.3 255.255.255.0
!
int lo0
    ip addr 3.3.3.3 255.255.255.255
!
router ei 10
    net 23.23.23.3 0.0.0.0
    net 3.3.3.3 0.0.0.0
    no au

Verifikasi:

Cek routing table dan tes PING

R1#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
1.0.0.0/32 is subnetted, 1 subnets
C 1.1.1.1 is directly connected, Loopback0
2.0.0.0/32 is subnetted, 1 subnets
D 2.2.2.2 [90/2297856] via 12.12.12.2, 00:05:19, Serial0/0
3.0.0.0/32 is subnetted, 1 subnets
D 3.3.3.3 [90/2300416] via 12.12.12.2, 00:05:19, Serial0/0
23.0.0.0/24 is subnetted, 1 subnets
D 23.23.23.0 [90/2172416] via 12.12.12.2, 00:05:19, Serial0/0
12.0.0.0/24 is subnetted, 1 subnets
C 12.12.12.0 is directly connected, Serial0/0

R1#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

R1#ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/16/36 ms

R1#ping 3.3.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/32/52 ms

Ilham P

Leave a comment Cancel reply